| FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 4.750 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.500 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 1.625 INCHES NOMINAL |
| FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| FIRST LEG CHAMFER ANGLE | 45.0 DEGREES NOMINAL |
| FIRST LEG LENGTH | 0.980 INCHES MINIMUM AND 1.020 INCHES MAXIMUM |
| FIRST LEG STYLE | CHAMFERED ENDS |
| FIRST LEG THICKNESS | 0.120 INCHES MINIMUM AND 0.130 INCHES MAXIMUM |
| FIRST LEG END WIDTH | 7.740 INCHES MINIMUM AND 7.780 INCHES MAXIMUM |
| FIRST LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| FIRST LEG HOLE DIAMETER | 0.185 INCHES NOMINAL |
| FIRST LEG WIDTH | 7.980 INCHES MINIMUM AND 8.020 INCHES MAXIMUM |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | BRACKET, MOUNTING |
| MATERIAL DOCUMENT AND CLASSIFICATION | TEMPER T52 ASSN STD SINGLE MATERIAL RESPONSE |
| MATERIAL | ALUMINUM ALLOY 6063 |
| MOUNTING HOLE TYPE | PLAIN |
| SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 4.000 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.436 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 2.000 INCHES NOMINAL |
| SECOND LEG CHAMFER ANGLE | 45.0 DEGREES NOMINAL |
| SECOND LEG LENGTH | 1.670 INCHES MINIMUM AND 1.710 INCHES MAXIMUM |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG STYLE | CHAMFERED ENDS |
| SECOND LEG THICKNESS | 0.120 INCHES MINIMUM AND 0.130 INCHES MAXIMUM |
| SECOND LEG END WIDTH | 7.740 INCHES MINIMUM AND 7.780 INCHES MAXIMUM |
| SECOND LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| SECOND LEG HOLE DIAMETER | 0.281 INCHES NOMINAL |
| SECOND LEG WIDTH | 7.980 INCHES MINIMUM AND 8.020 INCHES MAXIMUM |
| STYLE DESIGNATOR | ANGLE |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-P-24441/20 MIL SPEC 1ST TREATMENT RESPONSE AND 639435-15 MFR REF 2ND TREATMENT RESPONSE |
| SURFACE TREATMENT | PRIMER AND PAINT |