|
|
|
National Stock Number:
5340-01-515-2389
Federal Supply Class:
5340
National Item Identification Number:
015152389
Description:
BRACKET,DOUBLE ANGLE
Detail:
A rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
|
Manufacturer Information:
| 20564 | 61141 | ACTERNA LLC DBA JDSU | | 20564-01 | 61141 | ACTERNA LLC DBA JDSU | | 20564-02 | 61141 | ACTERNA LLC DBA JDSU |
|
Techincal Specification:
| CENTER SECTION WIDTH | 1.190 INCHES NOMINAL | | CENTER SECTION HEIGHT | 0.160 INCHES NOMINAL | | CENTER SECTION THICKNESS | 0.060 INCHES NOMINAL | | FIRST LEG LENGTH | 0.400 INCHES NOMINAL | | FIRST LEG HOLE ARRANGEMENT STYLE | NO HOLE | | FIRST LEG WIDTH | 1.190 INCHES NOMINAL | | FIRST LEG STYLE | SQUARE | | FIRST LEG THICKNESS | 0.060 INCHES NOMINAL | | MATERIAL | ALUMINUM ALLOY 5052 | | PART NAME ASSIGNED BY CONTROLLING AGENCY | CLAMP, HOLD DOWN | | PROPRIETARY CHARACTERISTICS | PACS | | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.250 INCHES NOMINAL | | SECOND LEG HOLE ARRANGEMENT STYLE | TWO HOLES | | SECOND LEG HOLE DIAMETER | 0.166 INCHES MINIMUM AND 0.169 INCHES MAXIMUM | | SECOND LEG LENGTH | 0.500 INCHES NOMINAL | | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.750 INCHES NOMINAL | | SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL | | SECOND LEG STYLE | SQUARE | | SECOND LEG THICKNESS | 0.060 INCHES NOMINAL | | SECOND LEG WIDTH | 1.190 INCHES NOMINAL | | SPECIAL FEATURES | CLAMP, HOLD DOWN RACK CHASSIS; (2) FASTENERS, SELF-CLINCHING, NO.4-40 (P/N CLS-440-2); FINISH-CLEAR CHEMICAL CONVERSION (MIL-C-5541C), CLASS 1A | | STYLE DESIGNATOR | DOUBLE ANGLE |
|
|