| FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 2.500 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.293 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.750 INCHES NOMINAL |
| FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH | 1.412 INCHES NOMINAL |
| FIRST LEG LENGTH | 1.562 INCHES NOMINAL |
| FIRST LEG STYLE | SQUARE |
| FIRST LEG THICKNESS | 0.250 INCHES NOMINAL |
| FIRST LEG HOLE ARRANGEMENT STYLE | FOUR HOLES |
| FIRST LEG HOLE DIAMETER | 0.014 INCHES MINIMUM AND 0.028 INCHES MAXIMUM |
| FIRST LEG WIDTH | 4.000 INCHES NOMINAL |
| MATERIAL DOCUMENT AND CLASSIFICATION | -ASTM-B308, TEMPER T6 ASSN STD SINGLE MATERIAL RESPONSE |
| MATERIAL | ALUMINUM ALLOY 6061 |
| MOUNTING HOLE TYPE | COUNTERBORED AND THREADED |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.687 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.500 INCHES NOMINAL |
| SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 3.000 INCHES NOMINAL |
| SECOND LEG LENGTH | 2.000 INCHES NOMINAL |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG STYLE | SQUARE |
| SECOND LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| SECOND LEG HOLE DIAMETER | 0.404 INCHES MINIMUM AND 0.410 INCHES MAXIMUM |
| SECOND LEG THICKNESS | 0.250 INCHES NOMINAL |
| SECOND LEG WIDTH | 4.000 INCHES NOMINAL |
| STYLE DESIGNATOR | ANGLE |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C-5541, CLASS 1A MIL SPEC SINGLE TREATMENT RESPONSE |
| SURFACE TREATMENT | PAINT |