| FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 3.760 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.810 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.810 INCHES NOMINAL |
| FIRST LEG ANGLE | 0.250 RADIANS NOMINAL |
| FIRST LEG LENGTH | 3.880 INCHES NOMINAL |
| FIRST LEG STYLE | SQUARE |
| FIRST LEG THICKNESS | 0.250 INCHES NOMINAL |
| FIRST LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| FIRST LEG HOLE DIAMETER | 0.560 INCHES NOMINAL |
| FIRST LEG WIDTH | 5.380 INCHES NOMINAL |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | ANGLE, FITTING |
| MATERIAL DOCUMENT AND CLASSIFICATION | 5052-H32 FED SPEC 1ST MATERIAL RESPONSE |
| MATERIAL | ALUMINUM ALLOY 5052 |
| MOUNTING HOLE TYPE | PLAIN |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.810 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.810 INCHES NOMINAL |
| SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH | 1.880 INCHES NOMINAL |
| SECOND LEG LENGTH | 5.380 INCHES NOMINAL |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG STYLE | SQUARE |
| SECOND LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| SECOND LEG HOLE DIAMETER | 0.560 INCHES NOMINAL |
| SECOND LEG THICKNESS | 0.250 INCHES NOMINAL |
| SECOND LEG WIDTH | 1.620 INCHES NOMINAL |
| SPECIAL FEATURES | DEBURR HOLES AND BREAK SHARP EDGES |
| STYLE DESIGNATOR | ANGLE |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C-5541 MIL SPEC 1ST TREATMENT RESPONSE AND MIL-P-53022 MIL SPEC 2ND TREATMENT RESPONSE |
| SURFACE TREATMENT | ALUMINUM ALLOY |