| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.875 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.810 INCHES NOMINAL |
| FIRST LEG ANGLE | 0.250 RADIANS NOMINAL |
| FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH | 1.750 INCHES NOMINAL |
| FIRST LEG LENGTH | 3.500 INCHES NOMINAL |
| FIRST LEG STYLE | SQUARE |
| FIRST LEG THICKNESS | 0.250 INCHES NOMINAL |
| FIRST LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| FIRST LEG HOLE DIAMETER | 0.562 INCHES NOMINAL |
| FIRST LEG WIDTH | 1.560 INCHES MINIMUM AND 1.680 INCHES MAXIMUM |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | ANGLE BRACKET |
| MATERIAL DOCUMENT AND CLASSIFICATION | A36 ASSN STD SINGLE MATERIAL RESPONSE |
| MATERIAL | STEEL |
| MOUNTING HOLE TYPE | PLAIN |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.875 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 1.750 INCHES NOMINAL |
| SECOND LEG LENGTH | 2.940 INCHES MINIMUM AND 3.060 INCHES MAXIMUM |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG STYLE | SQUARE |
| SECOND LEG HOLE ARRANGEMENT STYLE | ONE HOLE |
| SECOND LEG HOLE DIAMETER | 0.562 INCHES NOMINAL |
| SECOND LEG THICKNESS | 0.250 INCHES NOMINAL |
| SECOND LEG WIDTH | 1.560 INCHES MINIMUM AND 1.680 INCHES MAXIMUM |
| SPECIAL FEATURES | DEBURR HOLES NAD BREAK SHARP EDGES |
| STYLE DESIGNATOR | ANGLE |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C-8514 MIL SPEC 1ST TREATMENT RESPONSE AND MIL-P-53022 MIL SPEC 2ND TREATMENT RESPONSE AND MIL-C-22750 MIL SPEC 3RD TREATMENT RESPONSE AND 595 FED STD 4TH TREATMENT RESPONSE |