| DISTANCE FROM CENTER OF MOUNTING HOLE TO EDGE ALONG THE WIDTH | 0.560 INCHES NOMINAL |
| DISTANCE FROM END TO FIRST CLAMPING HOLE CENTER | 0.500 INCHES NOMINAL |
| DISTANCE FROM END TO FIRST MOUNTING HOLE CENTER | 1.000 INCHES NOMINAL |
| BLOCK HEIGHT | 0.590 INCHES MINIMUM AND 0.650 INCHES MAXIMUM |
| CENTER TO CENTER DISTANCE BETWEEN FIRST AND FIFTH CLAMPING HOLES | 3.970 INCHES MINIMUM AND 4.030 INCHES MAXIMUM |
| CENTER TO CENTER DISTANCE BETWEEN FIRST AND FOURTH CLAMPING HOLES | 2.970 INCHES MINIMUM AND 3.030 INCHES MAXIMUM |
| CENTER TO CENTER DISTANCE BETWEEN FIRST AND SECOND CLAMPING HOLES | 0.970 INCHES MINIMUM AND 1.030 INCHES MAXIMUM |
| CENTER TO CENTER DISTANCE BETWEEN FIRST AND SECOND MOUNTING HOLES | 3.000 INCHES NOMINAL |
| CENTER TO CENTER DISTANCE BETWEEN FIRST AND THIRD CLAMPING HOLES | 1.970 INCHES MINIMUM AND 2.030 INCHES MAXIMUM |
| CLAMPING HOLE DIAMETER | 0.280 INCHES NOMINAL FIRST HOLE0.400 INCHES NOMINAL SECOND HOLE |
| CLAMPING HOLE QUANTITY | 5 |
| OVERALL LENGTH | 4.820 INCHES MINIMUM AND 4.940 INCHES MAXIMUM |
| OVERALL WIDTH | 1.060 INCHES MINIMUM AND 1.180 INCHES MAXIMUM |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-R-3065,-3BC70A14B24E034F17 MIL SPEC SINGLE MATERIAL RESPONSE OR AMS 3209 ASSN STD SINGLE MATERIAL RESPONSE |
| MOUNTING FACILITY | UNTHREADED HOLE |
| MOUNTING HOLE DIAMETER | 0.350 INCHES MINIMUM AND 0.410 INCHES MAXIMUM |
| MOUNTING HOLE QUANTITY | 2 |
| STYLE DESIGNATOR | RECTANGULAR |