5340-01-353-8296, BRACKET,DOUBLE ANGLE

National Stock Number:
5340-01-353-8296

Federal Supply Class:
5340

National Item Identification Number:
013538296

Description:
BRACKET,DOUBLE ANGLE

Detail:
A rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.

Manufacturer Information:

751-7167-001	95105	ROCKWELL COLLINS, INC.
751-7751 ITEM 6	95105	ROCKWELL COLLINS, INC.

Techincal Specification:

CENTER SECTION THICKNESS	0.059 INCHES MINIMUM AND 0.067 INCHES MAXIMUM
CENTER SECTION WIDTH	0.380 INCHES NOMINAL
FIRST LEG HOLE ARRANGEMENT STYLE	ONE HOLE
FIRST LEG HOLE DIAMETER	0.136 INCHES NOMINAL
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH	0.230 INCHES NOMINAL
FIRST LEG STYLE	SQUARE
FIRST LEG THICKNESS	0.059 INCHES MINIMUM AND 0.067 INCHES MAXIMUM
FIRST LEG WIDTH	0.380 INCHES NOMINAL
MATERIAL DOCUMENT AND CLASSIFICATION	QQ-A-250/8 H32 FED SPEC SINGLE MATERIAL RESPONSE
MATERIAL	ALUMINUM ALLOY 5052
MOUNTING HOLE TYPE	COUNTERSUNK AND PLAIN
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH	0.190 INCHES NOMINAL
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH	0.150 INCHES NOMINAL
SECOND LEG RELATIONSHIP TO FIRST LEG	NOT IDENTICAL
SECOND LEG HOLE ARRANGEMENT STYLE	ONE HOLE
SECOND LEG HOLE DIAMETER	0.136 INCHES NOMINAL
SECOND LEG STYLE	SQUARE
SECOND LEG THICKNESS	0.059 INCHES MINIMUM AND 0.067 INCHES MAXIMUM
SECOND LEG WIDTH	0.380 INCHES NOMINAL
STYLE DESIGNATOR	DOUBLE ANGLE
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	MIL-C-5541 CL 3 MIL SPEC SINGLE TREATMENT RESPONSE
SURFACE TREATMENT	CHROMATE

Click here to Register for Free 30-day Trial