| FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| FIRST LEG CHAMFER ANGLE | 0.120 RADIANS NOMINAL |
| FIRST LEG HOLE ARRANGEMENT STYLE | ONE HOLE |
| FIRST LEG HOLE DIAMETER | 1.090 INCHES MINIMUM AND 1.150 INCHES MAXIMUM |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 1.220 INCHES MINIMUM AND 1.280 INCHES MAXIMUM |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.920 INCHES MINIMUM AND 0.960 INCHES MAXIMUM |
| FIRST LEG WIDTH | 1.850 INCHES MINIMUM AND 1.910 INCHES MAXIMUM |
| FIRST LEG LENGTH | 2.160 INCHES MINIMUM AND 2.220 INCHES MAXIMUM |
| FIRST LEG STYLE | CHAMFERED ENDS |
| FIRST LEG THICKNESS | 0.062 INCHES NOMINAL |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-766 FED SPEC SINGLE MATERIAL RESPONSE |
| MATERIAL | STEEL COMP 304 OR STEEL COMP 316 OR STEEL COMP 321 OR STEEL COMP 347 |
| SECOND LEG CHAMFER ANGLE | 0.120 RADIANS NOMINAL |
| SECOND LEG LENGTH | 2.720 INCHES MINIMUM AND 2.780 INCHES MAXIMUM |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG SLOT LENGTH | 0.860 INCHES MINIMUM AND 0.900 INCHES MAXIMUM |
| SECOND LEG SLOT WIDTH | 0.210 INCHES MINIMUM AND 0.230 INCHES MAXIMUM |
| SECOND LEG HOLE ARRANGEMENT STYLE | 2 SLOTS |
| SECOND LEG STYLE | CHAMFERED ENDS |
| SECOND LEG THICKNESS | 0.062 INCHES NOMINAL |
| SECOND LEG WIDTH | 1.850 INCHES MINIMUM AND 1.910 INCHES MAXIMUM |
| STYLE DESIGNATOR | ANGLE |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE |
| SURFACE TREATMENT | PASSIVATE |