| FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH | 1.380 INCHES NOMINAL |
| FIRST LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| FIRST LEG HOLE DIAMETER | 0.400 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 1.920 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.770 INCHES NOMINAL |
| FIRST LEG WIDTH | 1.750 INCHES NOMINAL |
| FIRST LEG LENGTH | 2.620 INCHES MINIMUM AND 2.660 INCHES MAXIMUM |
| FIRST LEG STYLE | SQUARE |
| FIRST LEG THICKNESS | 0.063 INCHES NOMINAL |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-250/8-H32 FED SPEC SINGLE MATERIAL RESPONSE |
| MATERIAL | ALUMINUM ALLOY 5052 |
| MOUNTING HOLE TYPE | PLAIN |
| SPECIAL FEATURES | 1ST LEG HAS 3 SLOTS ALONG BOTTOM 0.280 IN. BY 0.140 IN. AND 2 HOLES ON SIDE 0.127 IN. MIN AND 0.132 IN. MAX DIA; 2ND LEG HAS 4 HOLES ALONG BOTTOM 0.172 IN. MIN AND 0.175 MAX DIA |
| SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 1.250 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 1.5015 INCHES NOMINAL |
| SECOND LEG LENGTH | 2.516 INCHES MINIMUM AND 2.556 INCHES MAXIMUM |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG SLOT LENGTH | 1.557 INCHES NOMINAL |
| SECOND LEG SLOT WIDTH | 0.140 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 1.035 INCHES NOMINAL |
| SECOND LEG HOLE ARRANGEMENT STYLE | 2 SLOTS |
| SECOND LEG STYLE | SQUARE |
| SECOND LEG THICKNESS | 0.063 INCHES NOMINAL |
| SECOND LEG WIDTH | 2.540 INCHES NOMINAL |
| STYLE DESIGNATOR | ANGLE |