| CENTER SECTION HEIGHT | 1.800 INCHES MINIMUM AND 1.810 INCHES MAXIMUM |
| CENTER SECTION THICKNESS | 0.062 INCHES NOMINAL |
| FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| FIRST LEG HOLE ARRANGEMENT STYLE | ONE HOLE |
| FIRST LEG HOLE DIAMETER | 0.092 INCHES MINIMUM AND 0.098 INCHES MAXIMUM |
| FIRST LEG LENGTH | 0.760 INCHES MINIMUM AND 0.800 INCHES MAXIMUM |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.570 INCHES MINIMUM AND 0.580 INCHES MAXIMUM |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.130 INCHES MINIMUM AND 0.150 INCHES MAXIMUM |
| FIRST LEG WIDTH | 1.000 INCHES MINIMUM AND 1.040 INCHES MAXIMUM |
| FIRST LEG STYLE | SQUARE |
| FIRST LEG THICKNESS | 0.062 INCHES NOMINAL |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-766 FED SPEC SINGLE MATERIAL RESPONSE |
| MATERIAL | STEEL COMP 304 OR STEEL COMP 310 OR STEEL COMP 316 OR STEEL COMP 321 OR STEEL COMP 347 |
| MOUNTING HOLE TYPE | PLAIN |
| SECOND LEG ANGLE | 90.0 DEGREES NOMINAL |
| SECOND LEG RELATIONSHIP TO FIRST LEG | IDENTICAL |
| SECOND LEG LENGTH | 0.760 INCHES MINIMUM AND 0.800 INCHES MAXIMUM |
| SECOND LEG THICKNESS | 0.062 INCHES NOMINAL |
| STYLE DESIGNATOR | ADJACENT ANGLES |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE |
| SURFACE TREATMENT | PASSIVATE |