| CENTER SECTION HEIGHT | 0.540 INCHES NOMINAL |
| CENTER SECTION THICKNESS | 0.037 INCHES MINIMUM AND 0.043 INCHES MAXIMUM |
| CENTER SECTION WIDTH | 1.250 INCHES NOMINAL |
| FEATURES PROVIDED | NUT |
| FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| FIRST LEG HOLE ARRANGEMENT STYLE | ONE HOLE |
| FIRST LEG HOLE DIAMETER | 0.093 INCHES NOMINAL |
| FIRST LEG LENGTH | 0.571 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.109 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.625 INCHES NOMINAL |
| FIRST LEG WIDTH | 1.250 INCHES NOMINAL |
| FIRST LEG STYLE | SQUARE |
| FIRST LEG THICKNESS | 0.037 INCHES MINIMUM AND 0.043 INCHES MAXIMUM |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-250/8 FED SPEC SINGLE MATERIAL RESPONSE |
| MATERIAL | ALUMINUM ALLOY 5052 |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.109 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.625 INCHES NOMINAL |
| SECOND LEG ANGLE | 90.0 DEGREES NOMINAL |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG HOLE ARRANGEMENT STYLE | ONE HOLE |
| SECOND LEG HOLE DIAMETER | 0.093 INCHES NOMINAL |
| SECOND LEG LENGTH | 0.844 INCHES NOMINAL |
| SECOND LEG STYLE | SQUARE |
| SECOND LEG THICKNESS | 0.037 INCHES MINIMUM AND 0.043 INCHES MAXIMUM |
| SECOND LEG WIDTH | 1.250 INCHES NOMINAL |
| SPECIAL FEATURES | WITH TWO ABNGLE NUTS P/N504-7698-002 |
| STYLE DESIGNATOR | DOUBLE ANGLE |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C-5541,CLASS 3 MIL SPEC SINGLE TREATMENT RESPONSE |
| SURFACE TREATMENT | CHROMATE |