| FEATURES PROVIDED | NUT |
| FIRST LEG ANGLE | 0.090 RADIANS NOMINAL |
| FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 5.000 INCHES NOMINAL |
| FIRST LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| FIRST LEG HOLE DIAMETER | 0.328 INCHES MINIMUM AND 0.331 INCHES MAXIMUM |
| FIRST LEG LENGTH | 1.000 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.380 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 1.000 INCHES NOMINAL |
| FIRST LEG WIDTH | 7.000 INCHES NOMINAL |
| FIRST LEG STYLE | SQUARE |
| FIRST LEG THICKNESS | 0.090 INCHES NOMINAL |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-250/8,TEMP H32 FED SPEC SINGLE MATERIAL RESPONSE |
| MATERIAL | ALUMINUM ALLOY 5052 |
| MOUNTING HOLE TYPE | PLAIN |
| SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 6.000 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.315 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.500 INCHES NOMINAL |
| SECOND LEG CUTOUT LENGTH | 1.000 INCHES NOMINAL |
| SECOND LEG CUTOUT WIDTH | 4.000 INCHES NOMINAL |
| SECOND LEG LENGTH | 2.120 INCHES NOMINAL |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| SECOND LEG HOLE DIAMETER | 0.328 INCHES MINIMUM AND 0.331 INCHES MAXIMUM |
| SECOND LEG STYLE | CUT OUT |
| SECOND LEG THICKNESS | 0.090 INCHES NOMINAL |
| SECOND LEG WIDTH | 7.000 INCHES NOMINAL |
| SPECIAL FEATURES | ITEM INCLUDES R CLINCH NUTS PRESSED INTO MTG HOLES,6-32 UNC THREAD |
| STYLE DESIGNATOR | ANGLE |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C-5541,CL 1A MIL SPEC SINGLE TREATMENT RESPONSE |
| SURFACE TREATMENT | CHROMATE |