| CENTER SECTION HEIGHT | 4.430 INCHES NOMINAL |
| CENTER SECTION THICKNESS | 0.1875 INCHES NOMINAL |
| CENTER SECTION WIDTH | 11.380 INCHES NOMINAL |
| FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| FIRST LEG HOLE ARRANGEMENT STYLE | NO HOLE |
| FIRST LEG LENGTH | 1.000 INCHES NOMINAL |
| FIRST LEG WIDTH | 11.380 INCHES NOMINAL |
| FIRST LEG STYLE | SQUARE |
| FIRST LEG THICKNESS | 0.1875 INCHES NOMINAL |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-698 FED SPEC SINGLE MATERIAL RESPONSE |
| MATERIAL | STEEL |
| MOUNTING HOLE TYPE | PLAIN |
| SECOND LEG DISTANCE BETWEEN LOWER HOLE CENTERS ALONG WIDTH | 8.360 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.810 INCHES NOMINAL |
| SECOND LEG ANGLE | 90.0 DEGREES NOMINAL |
| SECOND LEG DISTANCE BETWEEN FIRST AND SECOND HOLE CENTERS ALONG WIDTH | 4.180 INCHES NOMINAL |
| SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH | 0.690 INCHES NOMINAL |
| SECOND LEG LENGTH | 2.000 INCHES NOMINAL |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 1.510 INCHES NOMINAL |
| SECOND LEG HOLE ARRANGEMENT STYLE | THREE HOLES |
| SECOND LEG HOLE DIAMETER | 0.271 INCHES MINIMUM AND 0.291 INCHES MAXIMUM |
| SECOND LEG STYLE | SQUARE |
| SECOND LEG THICKNESS | 0.1875 INCHES NOMINAL |
| SECOND LEG WIDTH | 11.380 INCHES NOMINAL |
| SPECIAL FEATURES | CENTER SECTION HAS APERATURE 1.250 IN. DIA,4 MTG HOLES 0.190 IN. MIN AND 0.210 IN. MAX DIA AND 2 MTG HOLES 0.271 IN. MIN AND 0.291 IN. MAX DIA |
| STYLE DESIGNATOR | ADJACENT ANGLES |
| SURFACE TREATMENT | PAINT |