|
|
|
National Stock Number:
5340-01-343-2797
Federal Supply Class:
5340
National Item Identification Number:
013432797
Description:
BRACKET,DOUBLE ANGLE
Detail:
A rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
|
Manufacturer Information:
| 3142300-030-11 | 99696 | LOCKHEED MARTIN CORPORATION DIV LOCKHEED MARTIN SYSTEMS & GLOBAL SOLUTIONS |
|
Techincal Specification:
| CENTER SECTION HEIGHT | 1.280 INCHES NOMINAL | | CENTER SECTION THICKNESS | 0.060 INCHES NOMINAL | | CENTER SECTION WIDTH | 2.250 INCHES NOMINAL | | FIRST LEG ANGLE | 90.0 DEGREES NOMINAL | | FIRST LEG CHAMFER ANGLE | 45.0 DEGREES NOMINAL | | FIRST LEG HOLE ARRANGEMENT STYLE | ONE HOLE | | FIRST LEG HOLE DIAMETER | 0.250 INCHES MINIMUM AND 0.254 INCHES MAXIMUM | | FIRST LEG LENGTH | 1.250 INCHES NOMINAL | | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.500 INCHES NOMINAL | | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 1.130 INCHES NOMINAL | | FIRST LEG END WIDTH | 0.750 INCHES NOMINAL | | FIRST LEG WIDTH | 2.250 INCHES NOMINAL | | FIRST LEG STYLE | CHAMFERED ENDS | | FIRST LEG THICKNESS | 0.060 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-766 COND A FED SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL COMP 302 | | MOUNTING HOLE TYPE | PLAIN | | SECOND LEG ANGLE | 90.0 DEGREES NOMINAL | | SECOND LEG LENGTH | 1.250 INCHES NOMINAL | | SECOND LEG RELATIONSHIP TO FIRST LEG | IDENTICAL | | SECOND LEG THICKNESS | 0.060 INCHES NOMINAL | | SPECIAL FEATURES | TWO HOLES 0.219 IN. DIA,LOCATED ON CENTER SECTION | | STYLE DESIGNATOR | ADJACENT ANGLES |
|
|