| CENTER SECTION HEIGHT | 0.750 INCHES NOMINAL |
| CENTER SECTION THICKNESS | 0.062 INCHES NOMINAL |
| CENTER SECTION WIDTH | 0.620 INCHES NOMINAL |
| FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 1.000 INCHES NOMINAL |
| FIRST LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| FIRST LEG HOLE DIAMETER | 0.158 INCHES MINIMUM AND 0.162 INCHES MAXIMUM |
| FIRST LEG LENGTH | 0.530 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.250 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.250 INCHES NOMINAL |
| FIRST LEG WIDTH | 1.750 INCHES NOMINAL |
| FIRST LEG STYLE | SQUARE |
| FIRST LEG THICKNESS | 0.062 INCHES NOMINAL |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-250/8-T32 FED SPEC SINGLE MATERIAL RESPONSE |
| MATERIAL | ALUMINUM ALLOY 5052 |
| MOUNTING HOLE TYPE | PLAIN |
| SECOND LEG ANGLE | 90.0 DEGREES NOMINAL |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG HOLE ARRANGEMENT STYLE | ONE HOLE |
| SECOND LEG HOLE DIAMETER | 0.158 INCHES MINIMUM AND 0.162 INCHES MAXIMUM |
| SECOND LEG LENGTH | 0.532 INCHES NOMINAL |
| SECOND LEG THICKNESS | 0.062 INCHES NOMINAL |
| STYLE DESIGNATOR | DOUBLE ANGLE |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C-5541 MIL SPEC SINGLE TREATMENT RESPONSE |
| SURFACE TREATMENT | CHROMATE |