| CENTER SECTION HEIGHT | 0.595 INCHES NOMINAL |
| CENTER SECTION THICKNESS | 0.087 INCHES MINIMUM AND 0.103 INCHES MAXIMUM |
| CENTER SECTION WIDTH | 3.060 INCHES NOMINAL |
| FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 1.672 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.310 INCHES NOMINAL |
| FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| FIRST LEG LENGTH | 1.878 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.310 INCHES NOMINAL |
| FIRST LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| FIRST LEG HOLE DIAMETER | 0.279 INCHES MINIMUM AND 0.288 INCHES MAXIMUM |
| FIRST LEG STYLE | CUT OUT |
| FIRST LEG THICKNESS | 0.087 INCHES MINIMUM AND 0.103 INCHES MAXIMUM |
| FIRST LEG WIDTH | 3.260 INCHES NOMINAL |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5510 ASSN STD SINGLE MATERIAL RESPONSE |
| MATERIAL | STEEL COMP 321 |
| MOUNTING HOLE TYPE | PLAIN |
| REINFORCEMENT METHOD | TURNED EDGE AND GUSSET |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 1.340 INCHES NOMINAL |
| SECOND LEG ANGLE | 90.0 DEGREES NOMINAL |
| SECOND LEG LENGTH | 2.600 INCHES NOMINAL |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 2.450 INCHES NOMINAL |
| SECOND LEG HOLE ARRANGEMENT STYLE | ONE HOLE |
| SECOND LEG HOLE DIAMETER | 1.440 INCHES NOMINAL |
| SECOND LEG THICKNESS | 0.087 INCHES MINIMUM AND 0.103 INCHES MAXIMUM |
| SECOND LEG WIDTH | 3.300 INCHES NOMINAL |
| SPECIAL FEATURES | 0.070 IN. HOLE DIA SECOND LEG ALONG W ONE PLACE; 0.180 IN. MIN AND 0.186 IN. MAX HOLE DIA FOUR PLACES IN 1.767 IN. BOLT CIRCLE DIA ALL IN SECOND LEG |
| STYLE DESIGNATOR | ADJACENT ANGLES |