|
|
|
National Stock Number:
5340-01-270-8929
Federal Supply Class:
5340
National Item Identification Number:
012708929
Description:
BRACKET,DOUBLE ANGLE
Detail:
A rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
|
Manufacturer Information:
| 1010739-001 | 05037 | ANACOMP, INC. | | 1010739-001 | 0HBH2 | LEXEL IMAGING SYSTEMS INC |
|
Techincal Specification:
| CENTER SECTION HEIGHT | 1.070 INCHES NOMINAL | | CENTER SECTION THICKNESS | 0.125 INCHES NOMINAL | | CENTER SECTION WIDTH | 5.500 INCHES NOMINAL | | FEATURES PROVIDED | RETAINING LUG | | FIRST LEG ANGLE | 90.0 DEGREES NOMINAL | | FIRST LEG LENGTH | 0.300 INCHES NOMINAL | | FIRST LEG HOLE ARRANGEMENT STYLE | NO HOLE | | FIRST LEG STYLE | SQUARE | | FIRST LEG THICKNESS | 0.125 INCHES NOMINAL | | FIRST LEG WIDTH | 5.500 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-250/11 T4 FED SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | ALUMINUM ALLOY 6061 | | SECOND LEG ANGLE | 43.0 DEGREES MINIMUM AND 47.0 DEGREES MAXIMUM | | SECOND LEG CHAMFER ANGLE | 43.0 DEGREES MINIMUM AND 47.0 DEGREES MAXIMUM | | SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL | | SECOND LEG STYLE | CHAMFERED ENDS | | SECOND LEG END WIDTH | 4.050 INCHES NOMINAL | | SECOND LEG LENGTH | 0.700 INCHES NOMINAL | | SECOND LEG THICKNESS | 0.125 INCHES NOMINAL | | SECOND LEG WIDTH | 4.250 INCHES NOMINAL | | STYLE DESIGNATOR | ADJACENT ANGLES | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C-5541 MIL SPEC SINGLE TREATMENT RESPONSE | | SURFACE TREATMENT | CHROMATE |
|
|