|
|
|
National Stock Number:
5340-01-269-4931
Federal Supply Class:
5340
National Item Identification Number:
012694931
Description:
BRACKET,DOUBLE ANGLE
Detail:
A rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
|
Manufacturer Information:
| 183102-1 | 71791 | CURTISS-WRIGHT CONTROLS, INC. |
|
Techincal Specification:
| CENTER SECTION HEIGHT | 0.165 INCHES MINIMUM AND 0.175 INCHES MAXIMUM | | CENTER SECTION THICKNESS | 0.050 INCHES NOMINAL | | CENTER SECTION WIDTH | 0.525 INCHES MINIMUM AND 0.535 INCHES MAXIMUM | | FIRST LEG ANGLE | 90.0 DEGREES NOMINAL | | FIRST LEG CHAMFER ANGLE | 45.0 DEGREES NOMINAL | | FIRST LEG LENGTH | 0.560 INCHES NOMINAL | | FIRST LEG HOLE ARRANGEMENT STYLE | ONE HOLE | | FIRST LEG STYLE | CHAMFERED ENDS | | FIRST LEG THICKNESS | 0.050 INCHES NOMINAL | | FIRST LEG WIDTH | 0.525 INCHES MINIMUM AND 0.535 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 6350 ASSN STD SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL COMP 4130 | | SECOND LEG ANGLE | 90.0 DEGREES NOMINAL | | SECOND LEG CHAMFER ANGLE | 45.0 DEGREES NOMINAL | | SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL | | SECOND LEG STYLE | CHAMFERED ENDS | | SECOND LEG HOLE ARRANGEMENT STYLE | THREE HOLES | | SECOND LEG LENGTH | 0.750 INCHES NOMINAL | | SECOND LEG THICKNESS | 0.050 INCHES NOMINAL | | SECOND LEG WIDTH | 0.525 INCHES MINIMUM AND 0.535 INCHES MAXIMUM | | STYLE DESIGNATOR | DOUBLE ANGLE | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C-8837,TYPE 2,CLASS 1 MIL SPEC SINGLE TREATMENT RESPONSE | | SURFACE TREATMENT | CADMIUM |
|
|