| FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 2.855 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.620 INCHES NOMINAL |
| FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| FIRST LEG LENGTH | 1.500 INCHES NOMINAL |
| FIRST LEG SLOT LENGTH | 0.620 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.620 INCHES NOMINAL |
| FIRST LEG HOLE ARRANGEMENT STYLE | 2 SLOTS |
| FIRST LEG SLOT WIDTH | 0.280 INCHES MINIMUM AND 0.336 INCHES MAXIMUM |
| FIRST LEG STYLE | SQUARE |
| FIRST LEG THICKNESS | 0.125 INCHES NOMINAL |
| FIRST LEG WIDTH | 4.120 INCHES NOMINAL |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-200/4 H111 FED SPEC 1ST MATERIAL RESPONSE OR QQ-A-200/5 H111 FED SPEC 2ND MATERIAL RESPONSE |
| MATERIAL | ALUMINUM ALLOY 5083 OR ALUMINUM ALLOY 5086 |
| MOUNTING HOLE TYPE | PLAIN AND THREADED |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.880 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.710 INCHES NOMINAL |
| SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 0.600 INCHES NOMINAL |
| SECOND LEG LENGTH | 1.500 INCHES NOMINAL |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG STYLE | SQUARE |
| SECOND LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| SECOND LEG HOLE DIAMETER | 0.200 INCHES MINIMUM AND 0.230 INCHES MAXIMUM |
| SECOND LEG THICKNESS | 0.125 INCHES NOMINAL |
| SECOND LEG WIDTH | 4.120 INCHES NOMINAL |
| SPECIAL FEATURES | SECOND LEG INCLUDES 0.190-24 UNC 2B NUT AND 0.125 IN. SQUARE PLATE |
| STYLE DESIGNATOR | ANGLE |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C-5541 CLASS 1A MIL SPEC SINGLE TREATMENT RESPONSE |
| SURFACE TREATMENT | CHROMATE |