|
|
|
National Stock Number:
5340-01-264-6507
Federal Supply Class:
5340
National Item Identification Number:
012646507
Description:
HINGE,BUTT
Detail:
A hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
|
Manufacturer Information:
| A-A-55592 | 58536 | FEDERAL COMMERCIAL ITEM DESCRIPTION PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC | | AA55592-15DF | 58536 | FEDERAL COMMERCIAL ITEM DESCRIPTION PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC | | MS35825-15DF | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| HINGE MOUNTING TYPE | FULL SURFACE | | KNUCKLE QUANTITY | 84 | | KNUCKLE TYPE | FRICTION | | OVERALL LENGTH | 83.970 INCHES MINIMUM AND 84.030 INCHES MAXIMUM | | MATERIAL THICKNESS | 0.055 INCHES MINIMUM AND 0.065 INCHES MAXIMUM | | MATERIAL | STEEL COMP 1008 OR STEEL COMP 1009 OR STEEL COMP 1015 OR STEEL COMP 1018 OR STEEL COMP 1020 OR STEEL BODY | | MATERIAL | STEEL COMP 1010 OR STEEL COMP 1020 PIN | | PERFORMANCE TYPE | NOT RATED | | PIN CENTER TO BODY EDGE DISTANCE | 0.969 INCHES MINIMUM AND 1.031 INCHES MAXIMUM | | PIN DIAMETER | 0.123 INCHES MINIMUM AND 0.127 INCHES MAXIMUM | | PIN REMOVABILITY | NONREMOVABLE | | REVERSIBLE FEATURE | NOT INCLUDED | | STYLE DESIGNATOR | BUTT | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-Z-325, TYPE 2, CLASS 2 FED SPEC 1ST TREATMENT RESPONSE OR QQ-P-416, TYPE 2, CLASS 2 FED SPEC 2ND TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | ZINC OR CADMIUM OVERALL |
|
|