| FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 4.000 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 1.000 INCHES NOMINAL |
| FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| FIRST LEG LENGTH | 2.250 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 1.000 INCHES NOMINAL |
| FIRST LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| FIRST LEG HOLE DIAMETER | 0.405 INCHES MINIMUM AND 0.440 INCHES MAXIMUM |
| FIRST LEG STYLE | SQUARE |
| FIRST LEG THICKNESS | 0.025 INCHES NOMINAL |
| FIRST LEG WIDTH | 6.000 INCHES NOMINAL |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-741 FED SPEC SINGLE MATERIAL RESPONSE |
| MATERIAL | STEEL |
| MOUNTING HOLE TYPE | PLAIN |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 2.430 INCHES NOMINAL |
| SECOND LEG CHAMFER ANGLE | 45.0 DEGREES NOMINAL |
| SECOND LEG LENGTH | 6.000 INCHES NOMINAL |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG STYLE | CHAMFERED ENDS |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 3.000 INCHES NOMINAL |
| SECOND LEG END WIDTH | 3.000 INCHES NOMINAL |
| SECOND LEG HOLE ARRANGEMENT STYLE | ONE HOLE |
| SECOND LEG HOLE DIAMETER | 3.000 INCHES MINIMUM AND 3.120 INCHES MAXIMUM |
| SECOND LEG THICKNESS | 0.025 INCHES NOMINAL |
| SECOND LEG WIDTH | 6.000 INCHES NOMINAL |
| STYLE DESIGNATOR | ANGLE |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TYPE 2,CL 3 FED SPEC 1ST TREATMENT RESPONSE OR ASTM B633 ASSN STD 2ND TREATMENT RESPONSE |
| SURFACE TREATMENT | CADMIUM AND CHROMATE OR ZINC AND CHROMATE |