|
|
|
National Stock Number:
5340-01-262-9566
Federal Supply Class:
5340
National Item Identification Number:
012629566
Description:
BRACKET,DOUBLE ANGLE
Detail:
A rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
|
Manufacturer Information:
| A3046237 | 80063 | US ARMY COMMUNICATIONS & ELECTRONICS MATERIEL READINESS COMMAND LOGISTICS ENGINEERING DIR |
|
Techincal Specification:
| CENTER SECTION HEIGHT | 10.1400 INCHES NOMINAL | | CENTER SECTION THICKNESS | 0.2500 INCHES NOMINAL | | CENTER SECTION WIDTH | 0.7200 INCHES MINIMUM AND 0.7800 INCHES MAXIMUM | | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.4200 INCHES NOMINAL | | FIRST LEG ANGLE | 0.6200 RADIANS NOMINAL | | FIRST LEG LENGTH | 0.9800 INCHES NOMINAL | | FIRST LEG SLOT LENGTH | 0.4060 INCHES NOMINAL | | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.3500 INCHES MINIMUM AND 0.4100 INCHES MAXIMUM | | FIRST LEG HOLE ARRANGEMENT STYLE | ONE SLOT | | FIRST LEG SLOT WIDTH | 0.2810 INCHES NOMINAL | | FIRST LEG STYLE | CORNER RADIUS | | FIRST LEG THICKNESS | 0.2500 INCHES NOMINAL | | FIRST LEG WIDTH | 0.7200 INCHES MINIMUM AND 0.7800 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-200/9 FED SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | ALUMINUM ALLOY 6063 | | MOUNTING HOLE TYPE | PLAIN | | SECOND LEG LENGTH | 1.0600 INCHES NOMINAL | | SECOND LEG RELATIONSHIP TO FIRST LEG | IDENTICAL | | SECOND LEG THICKNESS | 0.2500 INCHES NOMINAL | | STYLE DESIGNATOR | DOUBLE ANGLE | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-A-8625 MIL SPEC SINGLE TREATMENT RESPONSE | | SURFACE TREATMENT | ANODIZE |
|
|