| CENTER SECTION THICKNESS | 0.060 INCHES MINIMUM AND 0.066 INCHES MAXIMUM |
| FIRST LEG ANGLE | 149.0 DEGREES MINIMUM AND 151.0 DEGREES MAXIMUM |
| FIRST LEG HOLE ARRANGEMENT STYLE | ONE HOLE |
| FIRST LEG HOLE DIAMETER | 0.213 INCHES MINIMUM AND 0.224 INCHES MAXIMUM |
| FIRST LEG STYLE | END RADIUS AND TAPERED |
| FIRST LEG THICKNESS | 0.060 INCHES MINIMUM AND 0.066 INCHES MAXIMUM |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5599 ASSN STD SINGLE MATERIAL RESPONSE |
| MATERIAL | NICKEL ALLOY 625 |
| MOUNTING HOLE TYPE | PLAIN |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.280 INCHES MINIMUM AND 0.300 INCHES MAXIMUM |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.220 INCHES MINIMUM AND 0.240 INCHES MAXIMUM |
| SECOND LEG ANGLE | 142.0 DEGREES MINIMUM AND 143.0 DEGREES MAXIMUM |
| SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH | 0.710 INCHES NOMINAL |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG STYLE | CORNER RADIUS |
| SECOND LEG HOLE ARRANGEMENT STYLE | FOUR HOLES |
| SECOND LEG HOLE DIAMETER | 0.098 INCHES MINIMUM AND 0.102 INCHES MAXIMUM |
| SECOND LEG THICKNESS | 0.060 INCHES MINIMUM AND 0.066 INCHES MAXIMUM |
| SPECIAL FEATURES | FURNISHED W/TWO CLIPS AND RIVETED IN FOUR PLACES |
| STYLE DESIGNATOR | DOUBLE ANGLE |