|
|
|
National Stock Number:
5340-01-220-6575
Federal Supply Class:
5340
National Item Identification Number:
012206575
Description:
BRACKET,DOUBLE ANGLE
Detail:
A rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
|
Manufacturer Information:
| 109225-1 | 17472 | EATON AEROSPACE LLC | | 109225-1 | 99145 | EATON AEROSPACE LLC ED AND C WEST DIV |
|
Techincal Specification:
| CENTER SECTION WIDTH | 0.250 INCHES NOMINAL | | CENTER SECTION HEIGHT | 0.380 INCHES NOMINAL | | CENTER SECTION THICKNESS | 0.190 INCHES NOMINAL | | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.090 INCHES NOMINAL | | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.130 INCHES NOMINAL | | FIRST LEG ANGLE | 90.0 DEGREES NOMINAL | | FIRST LEG LENGTH | 0.310 INCHES NOMINAL | | FIRST LEG HOLE ARRANGEMENT STYLE | ONE HOLE | | FIRST LEG HOLE DIAMETER | 0.094 INCHES NOMINAL | | FIRST LEG WIDTH | 0.250 INCHES NOMINAL | | FIRST LEG STYLE | SQUARE | | FIRST LEG THICKNESS | 0.180 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-225/6,T351 FED SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | ALUMINUM ALLOY 2024 | | PROPRIETARY CHARACTERISTICS | PACS | | MOUNTING HOLE TYPE | PLAIN | | SECOND LEG ANGLE | 90.0 DEGREES NOMINAL | | SECOND LEG HOLE ARRANGEMENT STYLE | NO HOLE | | SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL | | SECOND LEG STYLE | SQUARE | | SECOND LEG THICKNESS | 0.180 INCHES NOMINAL | | SECOND LEG WIDTH | 0.250 INCHES NOMINAL | | SECOND LEG LENGTH | 0.870 INCHES NOMINAL | | SPECIAL FEATURES | 2 HOLES 0.094 IN. MIN AND 0.097 IN. MAX DIA LOCATED ON SECOND LEG PARALLEL TO W | | STYLE DESIGNATOR | DOUBLE ANGLE | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-A-8625,TYPE 1 MIL SPEC SINGLE TREATMENT RESPONSE | | SURFACE TREATMENT | ANODIZE |
|
|