|
|
|
National Stock Number:
5340-01-219-9650
Federal Supply Class:
5340
National Item Identification Number:
012199650
Description:
BRACKET,DOUBLE ANGLE
Detail:
A rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
|
Manufacturer Information:
| 546R025G01 | 97942 | NORTHROP GRUMMAN SYSTEMS CORPORATION |
|
Techincal Specification:
| CENTER SECTION HEIGHT | 1.440 INCHES NOMINAL | | CENTER SECTION THICKNESS | 0.090 INCHES NOMINAL | | CENTER SECTION WIDTH | 1.320 INCHES NOMINAL | | FIRST LEG ANGLE | 90.0 DEGREES NOMINAL | | FIRST LEG LENGTH | 0.560 INCHES NOMINAL | | FIRST LEG STYLE | SQUARE | | FIRST LEG THICKNESS | 0.090 INCHES NOMINAL | | FIRST LEG WIDTH | 1.320 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-250/8 FED SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | ALUMINUM ALLOY 5052 | | SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 1.240 INCHES NOMINAL | | SECOND LEG ANGLE | 90.0 DEGREES NOMINAL | | SECOND LEG LENGTH | 0.890 INCHES NOMINAL | | SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL | | SECOND LEG STYLE | SQUARE | | SECOND LEG THICKNESS | 0.090 INCHES NOMINAL | | SECOND LEG WIDTH | 1.770 INCHES NOMINAL | | SPECIAL FEATURES | CTR SECTION HAS 2 HOLES,DIA 0.125 IN.; 1ST LEG HAS 2 NUTS P/N 2JC2843H20 PRESSED IN; 2ND LEG HAS 2 CAPTIVE SCREWS P/N 583R840H10 | | STYLE DESIGNATOR | DOUBLE ANGLE | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-A-8625 TYPE 1,CL 1 MIL SPEC SINGLE TREATMENT RESPONSE | | SURFACE TREATMENT | ANODIZE |
|
|