| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.410 INCHES NOMINAL |
| FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| FIRST LEG LENGTH | 1.250 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.380 INCHES NOMINAL |
| FIRST LEG END RADIUS | 0.500 INCHES NOMINAL |
| FIRST LEG HOLE ARRANGEMENT STYLE | ONE HOLE |
| FIRST LEG HOLE DIAMETER | 0.406 INCHES MINIMUM AND 0.436 INCHES MAXIMUM |
| FIRST LEG STYLE | END RADIUS |
| FIRST LEG THICKNESS | 0.0598 INCHES NOMINAL |
| FIRST LEG WIDTH | 0.750 INCHES NOMINAL |
| MATERIAL DOCUMENT AND CLASSIFICATION | ASTM A366 ASSN STD SINGLE MATERIAL RESPONSE OR ASTM A569 ASSN STD SINGLE MATERIAL RESPONSE |
| MATERIAL | STEEL COMP 1009 |
| MOUNTING HOLE TYPE | PLAIN |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.410 INCHES NOMINAL |
| SECOND LEG LENGTH | 1.380 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.380 INCHES NOMINAL |
| SECOND LEG END RADIUS | 0.500 INCHES NOMINAL |
| SECOND LEG HOLE ARRANGEMENT STYLE | ONE SLOT |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG SLOT LENGTH | 0.465 INCHES MINIMUM AND 0.495 INCHES MAXIMUM |
| SECOND LEG SLOT WIDTH | 0.385 INCHES MINIMUM AND 0.415 INCHES MAXIMUM |
| SECOND LEG STYLE | END RADIUS |
| SECOND LEG THICKNESS | 0.0598 INCHES NOMINAL |
| SECOND LEG WIDTH | 0.750 INCHES NOMINAL |
| STYLE DESIGNATOR | ANGLE |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 2,CL 1 FED SPEC 1ST TREATMENT RESPONSE OR ASTM B633,TY 2 ASSN STD 2ND TREATMENT RESPONSE |
| SURFACE TREATMENT | CADMIUM AND CHROMATE OR ZINC AND CHROMATE |