| CENTER SECTION WIDTH | 2.000 INCHES NOMINAL |
| CENTER SECTION HEIGHT | 2.120 INCHES NOMINAL |
| CENTER SECTION THICKNESS | 0.063 INCHES NOMINAL |
| FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| FIRST LEG CORNER RADIUS | 0.120 INCHES NOMINAL |
| FIRST LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| FIRST LEG HOLE DIAMETER | 0.141 INCHES MINIMUM AND 0.147 INCHES MAXIMUM |
| FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 1.500 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.250 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.250 INCHES NOMINAL |
| FIRST LEG WIDTH | 2.000 INCHES NOMINAL |
| FIRST LEG LENGTH | 1.250 INCHES NOMINAL |
| FIRST LEG STYLE | CORNER RADIUS |
| FIRST LEG THICKNESS | 0.063 INCHES NOMINAL |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-250/8 H-32 FED SPEC SINGLE MATERIAL RESPONSE |
| MATERIAL | ALUMINUM ALLOY 5052 |
| MOUNTING HOLE TYPE | PLAIN AND COUNTERSUNK |
| SPECIAL FEATURES | 2ND HOLE EACH LEG CSK 0.134 IN. MIN AND 0.138 IN. MAX DIA; CTR SECT HOLE 1.500 IN. DIA AND 2 HOLES 0.206 IN. MIN AND 0.212 IN. MAX DIA; 2 SLOTS ON EACH LEG 0.219 IN. LG BY 0.256 IN. WD |
| SECOND LEG ANGLE | 90.0 DEGREES NOMINAL |
| SECOND LEG RELATIONSHIP TO FIRST LEG | IDENTICAL |
| SECOND LEG THICKNESS | 0.063 INCHES NOMINAL |
| SECOND LEG LENGTH | 1.250 INCHES NOMINAL |
| STYLE DESIGNATOR | ADJACENT ANGLES |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C-5541 CL 1 OR 3 MIL SPEC SINGLE TREATMENT RESPONSE |
| SURFACE TREATMENT | CHROMATE |