|
|
|
National Stock Number:
5340-01-215-5818
Federal Supply Class:
5340
National Item Identification Number:
012155818
Description:
BRACKET,DOUBLE ANGLE
Detail:
A rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
|
Manufacturer Information:
| SP299-1028 | 72429 | MISSION SYSTEMS DAVENPORT INC. |
|
Techincal Specification:
| CENTER SECTION WIDTH | 0.800 INCHES NOMINAL | | CENTER SECTION THICKNESS | 0.050 INCHES NOMINAL | | FIRST LEG ANGLE | 90.0 DEGREES NOMINAL | | FIRST LEG LENGTH | 0.450 INCHES NOMINAL | | FIRST LEG HOLE ARRANGEMENT STYLE | NO HOLE | | FIRST LEG WIDTH | 0.800 INCHES NOMINAL | | FIRST LEG STYLE | CORNER RADIUS | | FIRST LEG THICKNESS | 0.050 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-250/11,T6 FED SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | ALUMINUM ALLOY 6061 | | PROPRIETARY CHARACTERISTICS | PACS | | MOUNTING HOLE TYPE | PLAIN | | SECOND LEG ANGLE | 141.0 DEGREES NOMINAL | | SECOND LEG HOLE ARRANGEMENT STYLE | ONE HOLE | | SECOND LEG HOLE DIAMETER | 0.161 INCHES MINIMUM AND 0.173 INCHES MAXIMUM | | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.400 INCHES NOMINAL | | SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL | | SECOND LEG STYLE | CORNER RADIUS | | SECOND LEG THICKNESS | 0.050 INCHES NOMINAL | | SECOND LEG WIDTH | 0.800 INCHES NOMINAL | | SECOND LEG LENGTH | 1.000 INCHES NOMINAL | | SPECIAL FEATURES | SPRING TENSION CLIP RIVETED TO CENTER SECTION; FIRST LEG EXTENDED UPWARD AT 56 DEGREES | | STYLE DESIGNATOR | DOUBLE ANGLE | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C-5541 MIL SPEC SINGLE TREATMENT RESPONSE | | SURFACE TREATMENT | CHROMATE |
|
|