5365-01-210-0696 SHIM Index 5330-01-210-0698 GASKET SET

National Stock Number:
5340-01-210-0697

Federal Supply Class:
5340

National Item Identification Number:
012100697

Description:
BRACKET,DOUBLE ANGLE

Detail:
A rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.


Manufacturer Information:
53289-0407703ATK LAUNCH SYSTEMS LLC


Techincal Specification:
CENTER SECTION HEIGHT0.753 INCHES MINIMUM AND 0.763 INCHES MAXIMUM
CENTER SECTION WIDTH2.120 INCHES NOMINAL
FIRST LEG ANGLE90.0 DEGREES NOMINAL
FIRST LEG HOLE ARRANGEMENT STYLENO HOLE
FIRST LEG LENGTH1.000 INCHES NOMINAL
FIRST LEG END WIDTH0.600 INCHES NOMINAL
FIRST LEG WIDTH1.120 INCHES NOMINAL
FIRST LEG STYLESQUARE AND TAPERED
FIRST LEG THICKNESS0.195 INCHES MINIMUM AND 0.205 INCHES MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-18729 MIL SPEC SINGLE MATERIAL RESPONSE OR MIL-S-6758 MIL SPEC SINGLE MATERIAL RESPONSE
MATERIALSTEEL
SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH1.123 INCHES MINIMUM AND 1.127 INCHES MAXIMUM
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH0.500 INCHES NOMINAL
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH0.500 INCHES NOMINAL
SECOND LEG ANGLE90.0 DEGREES NOMINAL
SECOND LEG LENGTH1.500 INCHES NOMINAL
SECOND LEG RELATIONSHIP TO FIRST LEGNOT IDENTICAL
SECOND LEG HOLE ARRANGEMENT STYLETWO HOLES
SECOND LEG HOLE DIAMETER0.254 INCHES MINIMUM AND 0.258 INCHES MAXIMUM
SECOND LEG STYLESQUARE
SECOND LEG THICKNESS0.210 INCHES NOMINAL
SECOND LEG WIDTH2.120 INCHES NOMINAL
STYLE DESIGNATORDOUBLE ANGLE
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,CLASS 2,TYPE 2 FED SPEC SINGLE TREATMENT RESPONSE
SURFACE TREATMENTCADMIUM


Click here to Register for Free 30-day Trial