| FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH | 0.594 INCHES NOMINAL |
| FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 0.594 INCHES NOMINAL |
| FIRST LEG HOLE DIAMETER | 0.139 INCHES MINIMUM AND 0.146 INCHES MAXIMUM |
| FIRST LEG LENGTH | 1.420 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.213 INCHES NOMINAL |
| FIRST LEG END WIDTH | 1.070 INCHES NOMINAL |
| FIRST LEG WIDTH | 2.050 INCHES NOMINAL |
| FIRST LEG THICKNESS | 0.120 INCHES MINIMUM AND 0.130 INCHES MAXIMUM |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS 4027 ASSN STD SINGLE MATERIAL RESPONSE |
| MATERIAL | ALUMINUM ALLOY 6061 |
| MOUNTING HOLE TYPE | PLAIN |
| SECOND LEG DISTANCE BETWEEN UPPER HOLE CENTERS ALONG WIDTH | 1.660 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.300 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.390 INCHES NOMINAL |
| SECOND LEG DISTANCE BETWEEN FIRST AND SECOND HOLE CENTERS ALONG WIDTH | 0.830 INCHES NOMINAL |
| SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH | 1.010 INCHES NOMINAL |
| SECOND LEG LENGTH | 1.920 INCHES NOMINAL |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG HOLE ARRANGEMENT STYLE | THREE HOLES |
| SECOND LEG HOLE DIAMETER | 0.161 INCHES MINIMUM AND 0.176 INCHES MAXIMUM |
| SECOND LEG THICKNESS | 0.120 INCHES MINIMUM AND 0.130 INCHES MAXIMUM |
| SECOND LEG WIDTH | 2.050 INCHES NOMINAL |
| STYLE DESIGNATOR | ANGLE |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-P-23377 MIL SPEC SINGLE TREATMENT RESPONSE |
| SURFACE TREATMENT | PLASTIC POLYAMIDE |