| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.410 INCHES MINIMUM AND 0.610 INCHES MAXIMUM |
| FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| FIRST LEG HOLE DIAMETER | 0.531 INCHES NOMINAL |
| FIRST LEG LENGTH | 1.320 INCHES MINIMUM AND 1.440 INCHES MAXIMUM |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 1.420 INCHES NOMINAL |
| FIRST LEG HOLE ARRANGEMENT STYLE | ONE HOLE |
| FIRST LEG WIDTH | 2.880 INCHES MINIMUM AND 3.100 INCHES MAXIMUM |
| FIRST LEG STYLE | SQUARE |
| FIRST LEG THICKNESS | 0.250 INCHES NOMINAL |
| MATERIAL DOCUMENT AND CLASSIFICATION | JDM 1020 HR STEEL,FSCM 75160 MFR REF SINGLE MATERIAL RESPONSE |
| MATERIAL | STEEL COMP 1020 |
| PROPRIETARY CHARACTERISTICS | PACS |
| MOUNTING HOLE TYPE | PLAIN |
| SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 2.020 INCHES MINIMUM AND 2.080 INCHES MAXIMUM |
| SECOND LEG HOLE ARRANGEMENT STYLE | 2 SLOTS |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.550 INCHES MINIMUM AND 0.750 INCHES MAXIMUM |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.430 INCHES MINIMUM AND 0.510 INCHES MAXIMUM |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG SLOT LENGTH | 0.750 INCHES NOMINAL |
| SECOND LEG SLOT WIDTH | 0.406 INCHES NOMINAL |
| SECOND LEG STYLE | SQUARE |
| SECOND LEG THICKNESS | 0.250 INCHES NOMINAL |
| SECOND LEG LENGTH | 1.670 INCHES MINIMUM AND 1.796 INCHES MAXIMUM |
| SECOND LEG WIDTH | 2.880 INCHES MINIMUM AND 3.100 INCHES MAXIMUM |
| STYLE DESIGNATOR | ANGLE |