| FEATURES PROVIDED | NUT |
| FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| FIRST LEG CORNER RADIUS | 0.220 INCHES MINIMUM AND 0.280 INCHES MAXIMUM |
| FIRST LEG HOLE ARRANGEMENT STYLE | NO HOLE |
| FIRST LEG WIDTH | 0.980 INCHES MINIMUM AND 1.020 INCHES MAXIMUM |
| FIRST LEG LENGTH | 0.750 INCHES NOMINAL |
| FIRST LEG STYLE | CORNER RADIUS |
| FIRST LEG THICKNESS | 0.050 INCHES NOMINAL |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-250/5,T81 FED SPEC SINGLE MATERIAL RESPONSE |
| MATERIAL | ALUMINUM ALLOY 2024 |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.220 INCHES MINIMUM AND 0.280 INCHES MAXIMUM |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.230 INCHES MINIMUM AND 0.250 INCHES MAXIMUM |
| SECOND LEG CORNER RADIUS | 0.220 INCHES MINIMUM AND 0.280 INCHES MAXIMUM |
| SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 0.500 INCHES NOMINAL |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG STYLE | CORNER RADIUS |
| SECOND LEG THICKNESS | 0.050 INCHES NOMINAL |
| SECOND LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| SECOND LEG HOLE DIAMETER | 0.220 INCHES MINIMUM AND 0.230 INCHES MAXIMUM |
| SECOND LEG LENGTH | 0.750 INCHES NOMINAL |
| SECOND LEG WIDTH | 0.980 INCHES MINIMUM AND 1.020 INCHES MAXIMUM |
| SPECIAL FEATURES | NUT ATTACHED FOR RIGHT HAND APPLICATION |
| STYLE DESIGNATOR | ANGLE |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MMS425,FSCM 76301 MFR REF SINGLE TREATMENT RESPONSE |
| SURFACE TREATMENT | PRIMER |