| FIRST LEG STYLE | SQUARE |
| FIRST LEG THICKNESS | 0.250 INCHES NOMINAL |
| FIRST LEG WIDTH | 8.370 INCHES MINIMUM AND 8.490 INCHES MAXIMUM |
| MATERIAL DOCUMENT AND CLASSIFICATION | JDMA20 FSCM 75160 MFR REF SINGLE MATERIAL RESPONSE |
| MATERIAL | STEEL |
| PROPRIETARY CHARACTERISTICS | PACS |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.990 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.430 INCHES MINIMUM AND 0.510 INCHES MAXIMUM |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG SLOT LENGTH | 0.688 INCHES NOMINAL |
| SECOND LEG SLOT WIDTH | 0.438 INCHES NOMINAL |
| SECOND LEG STYLE | SQUARE |
| SECOND LEG THICKNESS | 0.250 INCHES NOMINAL |
| SECOND LEG LENGTH | 3.000 INCHES NOMINAL |
| SECOND LEG WIDTH | 8.370 INCHES MINIMUM AND 8.490 INCHES MAXIMUM |
| SPECIAL FEATURES | 2 SQUARE HOLES 0.406 IN. FIRST LEG; SECOND LEG CONTAINS 6 SLOTS |
| STYLE DESIGNATOR | ANGLE |
| FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 3.940 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.880 INCHES NOMINAL |
| FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| FIRST LEG LENGTH | 2.000 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 2.200 INCHES MINIMUM AND 2.280 INCHES MAXIMUM |