| FIRST LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| FIRST LEG HOLE DIAMETER | 0.390 INCHES MINIMUM AND 0.406 INCHES MAXIMUM |
| FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 2.130 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.440 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.430 INCHES NOMINAL |
| FIRST LEG WIDTH | 3.000 INCHES NOMINAL |
| FIRST LEG LENGTH | 1.580 INCHES NOMINAL |
| FIRST LEG STYLE | SQUARE |
| FIRST LEG THICKNESS | 0.109 INCHES MINIMUM AND 0.125 INCHES MAXIMUM |
| MATERIAL DOCUMENT AND CLASSIFICATION | SAE ASSN STD SINGLE MATERIAL RESPONSE |
| MATERIAL | STEEL COMP 1008 OR STEEL COMP 1010 |
| MOUNTING HOLE TYPE | PLAIN |
| SECOND LEG DISTANCE BETWEEN UPPER HOLE CENTERS ALONG WIDTH | 2.000 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.500 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.500 INCHES NOMINAL |
| SECOND LEG DISTANCE BETWEEN FIRST AND SECOND HOLE CENTERS ALONG WIDTH | 1.000 INCHES NOMINAL |
| SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH | 2.000 INCHES NOMINAL |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG STYLE | SQUARE |
| SECOND LEG THICKNESS | 0.109 INCHES MINIMUM AND 0.125 INCHES MAXIMUM |
| SECOND LEG HOLE DIAMETER | 0.281 INCHES MINIMUM AND 0.297 INCHES MAXIMUM |
| SECOND LEG WIDTH | 3.000 INCHES NOMINAL |
| STYLE DESIGNATOR | ANGLE |