|
|
|
National Stock Number:
5340-01-165-2526
Federal Supply Class:
5340
National Item Identification Number:
011652526
Description:
BRACKET,DOUBLE ANGLE
Detail:
A rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
|
Manufacturer Information:
| 469339 | 11862 | GENERAL MOTORS CORP CHEVROLET MOTOR DIV SPECIAL PRODUCTS DEPT | | 469339 | 7X677 | GENERAL MOTORS LLC |
|
Techincal Specification:
| CENTER SECTION THICKNESS | 0.032 INCHES MINIMUM AND 0.052 INCHES MAXIMUM | | FIRST LEG ANGLE | 90.0 DEGREES NOMINAL | | FIRST LEG HOLE ARRANGEMENT STYLE | NO HOLE | | FIRST LEG LENGTH | 0.422 INCHES NOMINAL | | FIRST LEG WIDTH | 0.540 INCHES NOMINAL | | FIRST LEG STYLE | SQUARE | | FIRST LEG THICKNESS | 0.032 INCHES MINIMUM AND 0.052 INCHES MAXIMUM | | MATERIAL | STEEL COMP 1008 OR STEEL COMP 1010 | | MOUNTING HOLE TYPE | PLAIN | | REINFORCEMENT METHOD | GUSSET | | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.430 INCHES NOMINAL | | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.520 INCHES NOMINAL | | SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL | | SECOND LEG STYLE | SQUARE | | SECOND LEG THICKNESS | 0.032 INCHES MINIMUM AND 0.052 INCHES MAXIMUM | | SECOND LEG HOLE ARRANGEMENT STYLE | ONE HOLE | | SECOND LEG HOLE DIAMETER | 0.495 INCHES MINIMUM AND 0.505 INCHES MAXIMUM | | SECOND LEG LENGTH | 0.920 INCHES NOMINAL | | SECOND LEG WIDTH | 0.960 INCHES NOMINAL | | SPECIAL FEATURES | CENTER SECTION SLOT 1.050 IN. LG,0.360 IN. W | | STYLE DESIGNATOR | DOUBLE ANGLE |
|
|