| CENTER SECTION WIDTH | 7.340 INCHES NOMINAL |
| CENTER SECTION HEIGHT | 0.440 INCHES NOMINAL |
| CENTER SECTION THICKNESS | 0.060 INCHES MINIMUM AND 0.090 INCHES MAXIMUM |
| FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH | 0.968 INCHES NOMINAL |
| FIRST LEG END WIDTH | 4.130 INCHES NOMINAL |
| FIRST LEG HOLE ARRANGEMENT STYLE | FOUR HOLES |
| FIRST LEG HOLE DIAMETER | 0.128 INCHES NOMINAL |
| FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 0.968 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.266 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.396 INCHES NOMINAL |
| FIRST LEG WIDTH | 7.340 INCHES NOMINAL |
| FIRST LEG LENGTH | 1.560 INCHES NOMINAL |
| FIRST LEG STYLE | ANGLE |
| FIRST LEG THICKNESS | 0.060 INCHES MINIMUM AND 0.090 INCHES MAXIMUM |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-250/8,TEMPER H32 FED SPEC SINGLE MATERIAL RESPONSE |
| MATERIAL | ALUMINUM ALLOY 5052 |
| MOUNTING HOLE TYPE | PLAIN |
| SPECIAL FEATURES | 1 HOLE 1.250 IN. DIA FRIST LEG |
| SECOND LEG ANGLE | 90.0 DEGREES NOMINAL |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG STYLE | EXTENDED FLAT |
| SECOND LEG THICKNESS | 0.060 INCHES MINIMUM AND 0.090 INCHES MAXIMUM |
| SECOND LEG LENGTH | 1.750 INCHES NOMINAL |
| SECOND LEG WIDTH | 6.220 INCHES NOMINAL |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | TT-E-529 FED SPEC SINGLE TREATMENT RESPONSE |
| SURFACE TREATMENT | ENAMEL BAKED |