| FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 46.0 MILLIMETERS NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 18.0 MILLIMETERS NOMINAL |
| FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 17.0 MILLIMETERS NOMINAL |
| FIRST LEG HOLE ARRANGEMENT STYLE | 2 SLOTS |
| FIRST LEG THICKNESS | 5.0 MILLIMETERS NOMINAL |
| FIRST LEG LENGTH | 68.0 MILLIMETERS MINIMUM AND 70.0 MILLIMETERS MAXIMUM |
| FIRST LEG SLOT LENGTH | 15.88 MILLIMETERS NOMINAL |
| FIRST LEG SLOT WIDTH | 11.11 MILLIMETERS NOMINAL |
| FIRST LEG STYLE | SQUARE |
| FIRST LEG WIDTH | 79.0 MILLIMETERS MINIMUM AND 81.0 MILLIMETERS MAXIMUM |
| MATERIAL DOCUMENT AND CLASSIFICATION | 1E357 FSCM 11083 MFR REF SINGLE MATERIAL RESPONSE |
| MATERIAL | STEEL |
| PROPRIETARY CHARACTERISTICS | PACS |
| MOUNTING HOLE TYPE | PLAIN AND THREADED |
| SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH | 22.0 MAJOR INCHES |
| SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 54.0 MILLIMETERS NOMINAL |
| SECOND LEG HOLE ARRANGEMENT STYLE | FOUR HOLES |
| SECOND LEG HOLE DIAMETER | 5.2 MILLIMETERS NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 9.0 MILLIMETERS NOMINAL |
| SECOND LEG LENGTH | 76.0 MILLIMETERS MINIMUM AND 78.0 MILLIMETERS MAXIMUM |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG STYLE | SQUARE |
| SECOND LEG THICKNESS | 5.0 MILLIMETERS NOMINAL |
| SECOND LEG WIDTH | 79.0 MILLIMETERS MINIMUM AND 81.0 MILLIMETERS MAXIMUM |
| SPECIAL FEATURES | TWO SLOTS SECOND LEG 8.73 MM BY 17.46 MM,SECOND LEG CUT BACK TO 68 MM |
| STYLE DESIGNATOR | ANGLE |