| FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| FIRST LEG END WIDTH | 3.300 INCHES NOMINAL |
| FIRST LEG HOLE ARRANGEMENT STYLE | 2 SLOTS |
| FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 1.110 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.350 INCHES NOMINAL |
| FIRST LEG WIDTH | 3.550 INCHES NOMINAL |
| FIRST LEG LENGTH | 0.700 INCHES NOMINAL |
| FIRST LEG SLOT LENGTH | 0.302 INCHES MINIMUM AND 0.322 INCHES MAXIMUM |
| FIRST LEG SLOT WIDTH | 0.177 INCHES MINIMUM AND 0.197 INCHES MAXIMUM |
| FIRST LEG STYLE | SQUARE AND TAPERED |
| FIRST LEG THICKNESS | 0.094 INCHES NOMINAL |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-225/8,ALLOY 6061,T4 OR T6 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-A200/9,ALLOY 6063,T5 FED SPEC SINGLE MATERIAL RESPONSE |
| MATERIAL | ALUMINUM ALLOY 6061 OR ALUMINUM ALLOY 6063 |
| SPECIAL FEATURES | 3 HOLES IN 1ST LEG 0.165 IN. DIA MIN,0.171 IN. DIA MAX |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.332 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.400 INCHES NOMINAL |
| SECOND LEG END WIDTH | 3.460 INCHES NOMINAL |
| SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 2.750 INCHES NOMINAL |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG SLOT LENGTH | 0.302 INCHES MINIMUM AND 0.322 INCHES MAXIMUM |
| SECOND LEG SLOT WIDTH | 0.177 INCHES MINIMUM AND 0.197 INCHES MAXIMUM |
| SECOND LEG STYLE | SQUARE AND TAPERED |
| SECOND LEG THICKNESS | 0.094 INCHES NOMINAL |
| SECOND LEG HOLE ARRANGEMENT STYLE | 2 SLOTS |
| SECOND LEG LENGTH | 0.875 INCHES NOMINAL |
| SECOND LEG WIDTH | 3.550 INCHES NOMINAL |
| STYLE DESIGNATOR | ANGLE |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C-5541,CL 1A MIL SPEC SINGLE TREATMENT RESPONSE |
| SURFACE TREATMENT | CHROMATE |