|
|
|
National Stock Number:
5340-01-161-2117
Federal Supply Class:
5340
National Item Identification Number:
011612117
Description:
BRACKET,DOUBLE ANGLE
Detail:
A rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
|
Manufacturer Information:
| C5077110 | 19207 | U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM | | C5077110-1 | 19207 | U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM | | C5077110-1 | 57958 | SIGNALS WARFARE PROJECT MANAGER | | SM-A-911309 | 80063 | US ARMY COMMUNICATIONS & ELECTRONICS MATERIEL READINESS COMMAND LOGISTICS ENGINEERING DIR |
|
Techincal Specification:
| FIRST LEG LENGTH | 0.750 INCHES NOMINAL | | FIRST LEG HOLE ARRANGEMENT STYLE | THREE HOLES | | FIRST LEG HOLE DIAMETER | 0.256 INCHES MINIMUM AND 0.263 INCHES MAXIMUM | | FIRST LEG WIDTH | 0.750 INCHES NOMINAL | | FIRST LEG STYLE | SQUARE | | FIRST LEG THICKNESS | 0.090 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-250/8 FED SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | ALUMINUM | | PROPRIETARY CHARACTERISTICS | PACS | | SECOND LEG ANGLE | 90.0 DEGREES NOMINAL | | SECOND LEG THICKNESS | 0.090 INCHES NOMINAL | | SECOND LEG LENGTH | 0.750 INCHES NOMINAL | | STYLE DESIGNATOR | ADJACENT ANGLES | | CENTER SECTION WIDTH | 10.750 INCHES NOMINAL | | CENTER SECTION HEIGHT | 1.990 INCHES MINIMUM AND 2.010 INCHES MAXIMUM | | CENTER SECTION THICKNESS | 0.090 INCHES NOMINAL | | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.620 INCHES NOMINAL | | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.440 INCHES NOMINAL | | FIRST LEG ANGLE | 90.0 DEGREES NOMINAL | | FIRST LEG DISTANCE BETWEEN FIRST AND SECOND HOLE CENTERS ALONG LENGTH | 4.750 INCHES NOMINAL |
|
|