| FIRST LEG DISTANCE BETWEEN SECOND AND THIRD HOLE CENTERS ALONG WIDTH | 4.000 NOMINAL INCHES |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.680 INCHES NOMINAL |
| FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| FIRST LEG DISTANCE BETWEEN FIRST AND SECOND HOLE CENTERS ALONG WIDTH | 4.760 INCHES NOMINAL |
| FIRST LEG HOLE DIAMETER | 0.656 NOMINAL INCHES |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 1.990 INCHES NOMINAL |
| FIRST LEG HOLE ARRANGEMENT STYLE | THREE HOLES |
| FIRST LEG THICKNESS | 0.375 INCHES NOMINAL |
| FIRST LEG WIDTH | 11.750 INCHES NOMINAL |
| FIRST LEG LENGTH | 2.180 INCHES NOMINAL |
| FIRST LEG STYLE | SQUARE |
| MATERIAL | STEEL COMP 1010 OR STEEL COMP 1011 OR STEEL COMP 1012 OR STEEL COMP 1013 OR STEEL COMP 1015 OR STEEL COMP 1016 OR STEEL COMP 1017 OR STEEL COMP 1018 OR STEEL COMP 1019 OR STEEL COMP 1020 |
| PROPRIETARY CHARACTERISTICS | PACS |
| MOUNTING HOLE TYPE | PLAIN |
| SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 4.500 INCHES NOMINAL |
| SECOND LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| SECOND LEG HOLE DIAMETER | 0.906 NOMINAL INCHES |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 1.225 INCHES NOMINAL |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG STYLE | SQUARE |
| SECOND LEG THICKNESS | 0.375 INCHES NOMINAL |
| SECOND LEG LENGTH | 3.255 INCHES NOMINAL |
| SECOND LEG WIDTH | 11.750 NOMINAL INCHES |
| SPECIAL FEATURES | RIGHT HAND |
| STYLE DESIGNATOR | ANGLE |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | TT-P-636 FED SPEC SINGLE TREATMENT RESPONSE OR MIL-P-14553 MIL SPEC SINGLE TREATMENT RESPONSE OR TT-P-664 FED SPEC SINGLE TREATMENT RESPONSE |
| SURFACE TREATMENT | PRIMER |