| CENTER SECTION HEIGHT | 0.219 INCHES NOMINAL |
| CENTER SECTION THICKNESS | 0.042 INCHES NOMINAL |
| CENTER SECTION WIDTH | 1.001 INCHES NOMINAL |
| FIRST LEG LENGTH | 0.344 INCHES NOMINAL |
| FIRST LEG HOLE ARRANGEMENT STYLE | NO HOLE |
| FIRST LEG STYLE | SQUARE |
| FIRST LEG THICKNESS | 0.042 INCHES NOMINAL |
| FIRST LEG WIDTH | 1.001 INCHES NOMINAL |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-766,TEMPER 1-4 HARD FED SPEC SINGLE MATERIAL RESPONSE |
| MATERIAL | STEEL COMP 301 OR STEEL COMP 302 |
| SECOND LEG CORNER RADIUS | 0.188 INCHES NOMINAL |
| SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 0.625 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.188 INCHES NOMINAL |
| SECOND LEG LENGTH | 0.438 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.172 INCHES MINIMUM AND 0.188 INCHES MAXIMUM |
| SECOND LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| SECOND LEG HOLE DIAMETER | 0.124 INCHES MINIMUM AND 0.129 INCHES MAXIMUM |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG STYLE | CORNER RADIUS |
| SECOND LEG THICKNESS | 0.042 INCHES NOMINAL |
| SECOND LEG WIDTH | 1.001 INCHES NOMINAL |
| STYLE DESIGNATOR | DOUBLE ANGLE |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | CAP-177 FSCM 11871 MFR REF SINGLE TREATMENT RESPONSE |
| SURFACE TREATMENT | PASSIVATE |