| FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| FIRST LEG DISTANCE BETWEEN FIRST AND SECOND HOLE CENTERS ALONG LENGTH | 1.160 INCHES NOMINAL |
| FIRST LEG HOLE DIAMETER | 0.266 INCHES MINIMUM AND 0.296 INCHES MAXIMUM |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.940 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.550 INCHES NOMINAL |
| FIRST LEG WIDTH | 1.250 INCHES NOMINAL |
| FIRST LEG LENGTH | 4.100 INCHES NOMINAL |
| FIRST LEG STYLE | SQUARE |
| FIRST LEG THICKNESS | 0.063 INCHES NOMINAL |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-200/8 T6 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-A-200/9 T5 FED SPEC SINGLE MATERIAL RESPONSE |
| MATERIAL | ALUMINUM ALLOY 6063 |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.830 INCHES NOMINAL |
| SECOND LEG LENGTH | 4.750 INCHES NOMINAL |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG SLOT LENGTH | 0.330 INCHES MINIMUM AND 0.350 INCHES MAXIMUM |
| SECOND LEG SLOT WIDTH | 0.130 INCHES MINIMUM AND 0.150 INCHES MAXIMUM |
| SECOND LEG HOLE ARRANGEMENT STYLE | 2 SLOTS |
| SECOND LEG STYLE | SQUARE |
| SECOND LEG THICKNESS | 0.063 INCHES MINIMUM AND 0.083 INCHES MAXIMUM |
| SECOND LEG WIDTH | 1.000 INCHES NOMINAL |
| SPECIAL FEATURES | FIRST LEG FIVE HOLES; FOURTH AND FIFTH HOLE 0.550 IN. CTR TO CTR; SECOND LEG CHAMFER ONE END 0.120 IN. BY 45 DEGREES |
| STYLE DESIGNATOR | ANGLE |
| SURFACE TREATMENT | ANODIZE |