|
|
|
National Stock Number:
5340-01-059-8692
Federal Supply Class:
5340
National Item Identification Number:
010598692
Description:
BRACKET,DOUBLE ANGLE
Detail:
A rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
|
Manufacturer Information:
| 16D700-371 | 81755 | LOCKHEED MARTIN CORPORATION |
|
Techincal Specification:
| CENTER SECTION WIDTH | 0.880 INCHES NOMINAL | | FIRST LEG HOLE ARRANGEMENT STYLE | ONE HOLE | | FIRST LEG HOLE DIAMETER | 0.250 INCHES NOMINAL | | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.250 INCHES NOMINAL | | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.250 INCHES NOMINAL | | FIRST LEG END WIDTH | 0.500 INCHES NOMINAL | | FIRST LEG STYLE | SQUARE AND TAPERED | | FIRST LEG THICKNESS | 0.071 INCHES NOMINAL | | FIRST LEG WIDTH | 0.880 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-250/4,ALLOY 2024,T62 FED SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | ALUMINUM ALLOY 2024 | | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.250 INCHES NOMINAL | | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.250 INCHES NOMINAL | | SECOND LEG OFFSET ANGLE | 30.0 DEGREES NOMINAL | | SECOND LEG END WIDTH | 0.500 INCHES NOMINAL | | SECOND LEG HOLE ARRANGEMENT STYLE | ONE HOLE | | SECOND LEG HOLE DIAMETER | 0.250 INCHES NOMINAL | | SECOND LEG STYLE | SQUARE AND TAPERED | | SECOND LEG THICKNESS | 0.071 INCHES NOMINAL | | SECOND LEG WIDTH | 0.880 INCHES NOMINAL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | A403 FSCM 81755 MFR REF SINGLE TREATMENT RESPONSE | | SURFACE TREATMENT | ANODIZE |
|
|