| FIRST LEG CORNER RADIUS | 0.250 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.250 INCHES NOMINAL |
| FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| FIRST LEG LENGTH | 0.630 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.250 INCHES NOMINAL |
| FIRST LEG HOLE ARRANGEMENT STYLE | ONE HOLE |
| FIRST LEG HOLE DIAMETER | 0.200 INCHES MINIMUM AND 0.205 INCHES MAXIMUM |
| FIRST LEG STYLE | CORNER RADIUS |
| FIRST LEG THICKNESS | 0.063 INCHES NOMINAL |
| FIRST LEG WIDTH | 0.880 INCHES NOMINAL |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-250/5,ALCLAD T3 FED SPEC SINGLE MATERIAL RESPONSE |
| MATERIAL | ALUMINUM ALLOY 2024 |
| SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH | 0.370 INCHES NOMINAL |
| SECOND LEG END RADIUS | 0.250 INCHES NOMINAL |
| SECOND LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| SECOND LEG HOLE DIAMETER | 0.098 INCHES NOMINAL |
| SECOND LEG LENGTH | 1.000 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.250 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.250 INCHES NOMINAL |
| SECOND LEG WIDTH | 0.500 INCHES NOMINAL |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG STYLE | END RADIUS |
| SECOND LEG THICKNESS | 0.063 INCHES NOMINAL |
| SPECIAL FEATURES | RIGHT HAND OFFSET |
| STYLE DESIGNATOR | ANGLE |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C-5541 MIL SPEC 1ST TREATMENT RESPONSE AND NAI-1269 FSCM 76823 MFR REF 2ND TREATMENT RESPONSE |
| SURFACE TREATMENT | CHROMATE AND PAINT |