| FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 1.810 INCHES NOMINAL |
| FIRST LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| FIRST LEG HOLE DIAMETER | 0.215 INCHES MINIMUM AND 0.223 INCHES MAXIMUM |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.480 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.370 INCHES NOMINAL |
| FIRST LEG WIDTH | 1.000 INCHES NOMINAL |
| FIRST LEG LENGTH | 5.250 INCHES NOMINAL |
| FIRST LEG STYLE | SQUARE |
| FIRST LEG THICKNESS | 0.120 INCHES NOMINAL |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5643 ASSN STD SINGLE MATERIAL RESPONSE |
| MATERIAL | STEEL |
| MOUNTING HOLE TYPE | COUNTERSUNK |
| SECOND LEG DISTANCE BETWEEN LOWER HOLE CENTERS ALONG WIDTH | 0.995 INCHES MINIMUM AND 1.005 INCHES MAXIMUM |
| SECOND LEG DISTANCE BETWEEN UPPER HOLE CENTERS ALONG WIDTH | 4.500 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.280 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.370 INCHES NOMINAL |
| SECOND LEG DISTANCE BETWEEN FIRST AND SECOND HOLE CENTERS ALONG WIDTH | 1.740 INCHES MINIMUM AND 1.750 INCHES MAXIMUM |
| SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH | 0.090 INCHES NOMINAL |
| SECOND LEG LENGTH | 5.250 INCHES NOMINAL |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG HOLE ARRANGEMENT STYLE | FOUR HOLES |
| SECOND LEG HOLE DIAMETER | 0.257 INCHES MINIMUM AND 0.264 INCHES MAXIMUM |
| SECOND LEG STYLE | SQUARE |
| SECOND LEG THICKNESS | 0.120 INCHES NOMINAL |
| SECOND LEG WIDTH | 1.000 INCHES NOMINAL |
| STYLE DESIGNATOR | ANGLE |