| FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| FIRST LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| FIRST LEG HOLE DIAMETER | 0.276 INCHES MINIMUM AND 0.287 INCHES MAXIMUM |
| FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 2.000 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.550 INCHES MINIMUM AND 0.570 INCHES MAXIMUM |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.360 INCHES MINIMUM AND 0.400 INCHES MAXIMUM |
| FIRST LEG WIDTH | 2.730 INCHES MINIMUM AND 2.790 INCHES MAXIMUM |
| FIRST LEG LENGTH | 1.050 INCHES MINIMUM AND 1.110 INCHES MAXIMUM |
| FIRST LEG STYLE | SQUARE |
| FIRST LEG THICKNESS | 0.090 INCHES NOMINAL |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-766,CLASS 321,COND A FED SPEC SINGLE MATERIAL RESPONSE |
| MATERIAL | STEEL COMP 321 |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.400 INCHES MINIMUM AND 0.420 INCHES MAXIMUM |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.360 INCHES MINIMUM AND 0.400 INCHES MAXIMUM |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG THICKNESS | 0.090 INCHES NOMINAL |
| SECOND LEG HOLE ARRANGEMENT STYLE | ONE HOLE |
| SECOND LEG HOLE DIAMETER | 0.193 INCHES MINIMUM AND 0.202 INCHES MAXIMUM |
| SECOND LEG LENGTH | 1.100 INCHES MINIMUM AND 1.160 INCHES MAXIMUM |
| SECOND LEG WIDTH | 2.730 INCHES MINIMUM AND 2.790 INCHES MAXIMUM |
| STYLE DESIGNATOR | ANGLE |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE |
| SURFACE TREATMENT | PASSIVATE |