| CENTER SECTION WIDTH | 0.750 INCHES NOMINAL |
| CENTER SECTION HEIGHT | 0.625 INCHES NOMINAL |
| CENTER SECTION THICKNESS | 0.051 INCHES NOMINAL |
| FEATURES PROVIDED | NUT |
| FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| FIRST LEG DISTANCE BETWEEN FIRST AND SECOND HOLE CENTERS ALONG LENGTH | 0.188 INCHES NOMINAL |
| FIRST LEG DISTANCE BETWEEN FIRST AND SECOND HOLE CENTERS ALONG WIDTH | 0.187 INCHES NOMINAL |
| FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 0.374 INCHES NOMINAL |
| FIRST LEG END RADIUS | 0.500 INCHES NOMINAL |
| FIRST LEG HOLE ARRANGEMENT STYLE | FOUR HOLES |
| FIRST LEG HOLE DIAMETER | 0.098 INCHES NOMINAL |
| FIRST LEG DISTANCE BETWEEN SECOND AND THIRD HOLE CENTERS ALONG LENGTH | 0.188 INCHES NOMINAL |
| FIRST LEG DISTANCE BETWEEN SECOND AND THIRD HOLE CENTERS ALONG WIDTH | 0.375 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.188 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.188 INCHES NOMINAL |
| FIRST LEG WIDTH | 0.750 INCHES NOMINAL |
| FIRST LEG LENGTH | 1.125 INCHES NOMINAL |
| FIRST LEG STYLE | END RADIUS |
| FIRST LEG THICKNESS | 0.051 INCHES NOMINAL |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-250/5,ALCLAD T4 FED SPEC SINGLE MATERIAL RESPONSE |
| MATERIAL | ALUMINUM ALLOY 2024 |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.438 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.375 INCHES NOMINAL |
| SECOND LEG END RADIUS | 0.500 INCHES NOMINAL |
| SECOND LEG ANGLE | 90.0 DEGREES NOMINAL |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG SLOT LENGTH | 0.500 INCHES NOMINAL |
| SECOND LEG SLOT WIDTH | 0.250 INCHES NOMINAL |
| SECOND LEG STYLE | END RADIUS |
| SECOND LEG THICKNESS | 0.051 INCHES NOMINAL |
| SECOND LEG HOLE ARRANGEMENT STYLE | ONE SLOT |
| SECOND LEG LENGTH | 1.188 INCHES NOMINAL |
| SECOND LEG WIDTH | 0.750 INCHES NOMINAL |
| STYLE DESIGNATOR | DOUBLE ANGLE |