|
|
|
National Stock Number:
5340-01-032-3048
Federal Supply Class:
5340
National Item Identification Number:
010323048
Description:
BRACKET,DOUBLE ANGLE
Detail:
A rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
|
Manufacturer Information:
| 3096400-179-1 | 25500 | LOCKHEED MARTIN CORPORATION | | 3096400-179-1 | 99696 | LOCKHEED MARTIN CORPORATION DIV LOCKHEED MARTIN SYSTEMS & GLOBAL SOLUTIONS |
|
Techincal Specification:
| CENTER SECTION HEIGHT | 0.505 INCHES NOMINAL | | CENTER SECTION THICKNESS | 0.125 INCHES NOMINAL | | CENTER SECTION WIDTH | 0.750 INCHES NOMINAL | | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.380 INCHES NOMINAL | | FIRST LEG ANGLE | 90.0 DEGREES NOMINAL | | FIRST LEG LENGTH | 0.770 INCHES NOMINAL | | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.380 INCHES NOMINAL | | FIRST LEG HOLE ARRANGEMENT STYLE | ONE HOLE | | FIRST LEG HOLE DIAMETER | 0.219 INCHES NOMINAL | | FIRST LEG STYLE | SQUARE | | FIRST LEG THICKNESS | 0.125 INCHES NOMINAL | | FIRST LEG WIDTH | 0.750 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-200/11,TO FED SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | ALUMINUM ALLOY 6061 | | SECOND LEG ANGLE | 90.0 DEGREES NOMINAL | | SECOND LEG LENGTH | 0.880 INCHES NOMINAL | | SECOND LEG HOLE ARRANGEMENT STYLE | NO HOLE | | SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL | | SECOND LEG STYLE | SQUARE | | SECOND LEG THICKNESS | 0.125 INCHES NOMINAL | | SECOND LEG WIDTH | 0.750 INCHES NOMINAL | | STYLE DESIGNATOR | DOUBLE ANGLE |
|
|