| FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| FIRST LEG LENGTH | 1.453 INCHES MINIMUM AND 1.547 INCHES MAXIMUM |
| FIRST LEG STYLE | SQUARE |
| FIRST LEG THICKNESS | 0.170 INCHES MINIMUM AND 0.210 INCHES MAXIMUM |
| FIRST LEG WIDTH | 3.170 INCHES MINIMUM AND 3.210 INCHES MAXIMUM |
| MATERIAL | STEEL COMP 1015 |
| SPECIAL FEATURES | A 1/4-20 THREAD SCREW WELDED ON SHORT LEG,SCREW IS 1.156 IN. LG,0.920 IN. FROM EDGE TO CENTER OF SCREW ALONG W,0.638 IN. FROM EDGE TO SCREW CENTER ALONG LG RIGHT SIDE |
| SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 1.938 INCHES NOMINAL |
| SECOND LEG HOLE DIAMETER | 0.292 INCHES MINIMUM AND 0.303 INCHES MAXIMUM |
| SECOND LEG LENGTH | 1.953 INCHES MINIMUM AND 2.047 INCHES MAXIMUM |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.719 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.626 INCHES NOMINAL |
| SECOND LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| SECOND LEG WIDTH | 3.170 INCHES MINIMUM AND 3.210 INCHES MAXIMUM |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG STYLE | SQUARE |
| SECOND LEG THICKNESS | 0.170 INCHES MINIMUM AND 0.210 INCHES MAXIMUM |
| STYLE DESIGNATOR | ANGLE |
| SURFACE TREATMENT | CADMIUM OR PAINT OR ZINC |