|
|
|
National Stock Number:
5340-01-026-4673
Federal Supply Class:
5340
National Item Identification Number:
010264673
Description:
CLIP,SPRING TENSION
Detail:
A preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
|
Manufacturer Information:
| 6013-8A | 91506 | AUGAT INC | | M24066/2-115 | 80205 | NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE | | M24066/2-115 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MIL-C-24066 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | NASM24066/2 | 80205 | NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE |
|
Techincal Specification:
| DISTANCE FROM LOOP CENTER TO END | 0.132 INCHES NOMINAL | | DEPARTURE FROM CITED DOCUMENT | AS MODIFIED BY MATERIAL WHICH MUST CONFORM TO SHIPS PARTS CONTROL CENTER SPECIAL QUALITY CONTROL PROVISIONS | | HOLE DIAMETER | 0.068 INCHES MINIMUM AND 0.0741 INCHES MAXIMUM | | LENGTH | 0.220 INCHES MINIMUM AND 0.240 INCHES MAXIMUM | | LOOP/HOLDING DIMENSION | 0.185 INCHES MINIMUM AND 0.205 INCHES MAXIMUM | | OVERALL HEIGHT | 0.250 INCHES MINIMUM AND 0.290 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | ASTM A682 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL THICKNESS | 0.009 INCHES MINIMUM AND 0.015 INCHES MAXIMUM | | MATERIAL | STEEL OVERALL | | MOUNTING METHOD | UNTHREADED HOLE | | SPECIAL TEST FEATURES | SPECIAL QUALITY CONTROL TESTING | | WIDTH | 0.615 INCHES MINIMUM AND 0.635 INCHES MAXIMUM | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM AND CHROMATE OVERALL | | TEST DATA DOCUMENT | 81349-MIL-P-23199 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
|
|